Cable hunting: Directly hunt the cable with RJ11, RJ45 and BNC terminal and other metal leads through adaptor.
When cable is hunted, there is no need to strip off cable sheath, which is easy and quick to judge the location of breakpoint in cable.
It can directly hunt cable when weak current equipment is turned on, such as Ethernet switch, router.
Test network cable: It can fully test the line sequence of network cable, open circuit, short-circuit, miswire, reverse connection and splitpairs.
Test line level, positive and negative polarity.
Test the status of telephone line: It can test the working status of telephone line (idle, ringing, and off-hook) and judge TIP or RING line.
Check lead continuity.
Test the connection between network cable and switch port.
It provides low voltage prompt function and the receiver has installed spotlight.
Operating temperature: 0��40OC, maximal 80 % relative humidity��non-condensing��.
Storage temperature: -10��50 OC, maximal 80 % relative humidity��non-condensing, battery not included��
Altitude: Anti-explosion rating: IP 40
Distance of emitting signal : >3000m
Safety class: IEC61010 -1 600V CAT III, pollution class II.
Battery: emitter 3 x 1.5V/AA; receiver 6F22/9V
Size: emitter 125mm x 66mm x 30mm; receiver 210mm x 45mm x 23mm
Weight: approx. 95 g for emitter (battery not included); approx. 70 g for receiver (battery not included)
1X FWT01 Emitter
1X FWT01 Receiver
1X RJ11 telephone line
1X red and black signal output wire
Note: prices are in USD